Laser rangefinder modules for raspberry pi / SBC
Board-level modules · published single-unit prices · figures verified 2026-10-23
For raspberry pi / SBC the binding constraint is usb-uart bridge required; check baud stability under load. The table below filters the catalogue to the classes that fit this job, with the published single-unit price for each.
Classes that fit raspberry pi / SBC
| Model | Range | Emitter | Blind zone | Supply | Published unit price |
|---|---|---|---|---|---|
| LRF10VB | 0.05–9 m | 940 nm DToF | 5 cm | 3.3–5 V | $10 |
| LRF22VB | 0.05–20 m | 905 nm | 5 cm | 3.3–5 V | $12 |
| LRF50VB | 0.05–50 m | 905 nm | 5 cm | 3.3–5 V | $70 |
| LR1000E2 | 4–1,000 m | 905 nm | 4 m | 3.3–5 V | $80 |
| LR2000E2 | 4–2,000 m | 905 nm | 4 m | 3.3–5 V | $120 |
| LRF3000A1 | ≥3,000 m | 905 nm | 4 m | 3.3–5 V | $200 |
What to check before ordering
- Working distance versus blind zone — the module must read the nearest target, not the farthest.
- Supply rail — USB-UART bridge required; check baud stability under load.
- Interface — UART-TTL with a documented frame and checksum on every class; no native analog output.
What this page does not claim
It does not quote competitors' specifications from memory, and it publishes no number our catalogue does not carry. Where a figure matters and is unpublished, ask for the datasheet.
Related
- range-first selection table
- part-number cross-reference
- Laser rangefinder module selection
- Laser rangefinder modules for arduino / maker boards
- Laser rangefinder modules for golf launch products
- Laser rangefinder modules for uav / drone payload